MCITP MCSE Bootcamp Training :  Microsoft MCITP MCSE certification

 

MCITP MCSE Guide Free MCITP MCSE Free MCITP MCSE Training MCITP MCSE MCITP MCSE 2003 MCITP MCSE Books MCITP MCSE Boot Camp MCITP MCSE Brain dumps MCITP MCSE Certification MCITP MCSE Exam MCITP MCSE Free MCITP MCSE Jobs MCITP MCSE Logo MCITP MCSE Online MCITP MCSE Online Training MCITP MCSE Practice MCITP MCSE Practice Exams MCITP MCSE Practice Tests MCITP MCSE Requirements MCITP MCSE Resume MCITP MCSE Salary MCITP MCSE Self Paced Training Kit MCITP MCSE Study MCITP MCSE Study Guide MCITP MCSE Study Guides MCITP MCSE Test MCITP MCSE Testing MCITP MCSE Training MCITP MCSE Training Kit MCITP MCSE Training Video MCITP MCSE Windows 2003 Microsoft MCITP MCSE Training Training MCITP MCSE Windows 2003 MCITP MCSE

 

MCITP MCSE : Security Specialist Describe the main characteristics of network-attached storage. RAID Redundant Array of Inexpensive (or Independent) Disks. A RAID array is a collection of drives which collectively act as a single storage system, which can tolerate the failure of a drive without losing data, and which can operate independently of each other. Level 0 referred to as striping, is not redundant. Data is split across drives, resulting in higher data throughput. Since no redundant information is stored, performance is very good, but the failure of any disk in the array results in all data loss. Level 1 referred to as mirroring with 2 hard drives. It provides redundancy by duplicating all data from one drive on another drive. Performance is better than a single drive, but if either drive fails, no data is lost. This is a good entry-level redundant system, since only two drives are required. Level 2, which uses Hamming error correction codes, is intended for use with drives which do not have built-in error detection. All SCSI drives support built-in error detection, so this level is not needed if using SCSI drives. Level 3 stripes data at a byte level across several drives, with parity stored on one drive. It is otherwise similar to level 4. Byte-level striping requires hardware support for efficient use. Level 4 stripes data at a block level across several drives, with parity stored on one drive. The parity information allows recovery from the failure of any single drive. Performance is very good for reads. Writes, however, require that parity data be updated each time. This slows small random writes, in particular, though large writes or sequential writes are fairly fast. Level 5 striping with distributed parity. Similar to level 4, but distributes parity among the drives. No single disk is devoted to parity. This can speed small writes in multiprocessing systems. Because parity data must be distributed on each drive during reads, the performance for reads tends to be considerably lower than a level 4 array.